Carl-goldberg GBGA1024 Manuel d'utilisateur télécharger pdf

Surge 400

WARNING

A radio-controlled model is not a toy and is not intended for persons under 16 years old. Keep

this kit out of the reach of younger children, as it contains parts that could be dangerous. A radio-

controlled model is capable of causing serious bodily injury and property damage. It is the buyer's

responsibility to assemble this aircraft correctly and to properly install the motor, radio, and all other

equipment. Test and fly the finished model only in the presence and with the assistance of another

experienced R/C flyer. The model must always be operated and flown using great care and common

sense, as well as in accordance with the Safety Code of the Academy of Model Aeronautics (5151

Memorial Drive, Muncie, IN 47302, 1-800-435-9262). We suggest you join the AMA and become prop-

erly insured prior to flying this model. Also, consult with the AMA or your local hobby dealer to find an

experienced instructor in your area. Per the Federal Communications Commission, you are required

to use only those radio frequencies specified "for Model Aircraft."

LIMITED WARRANTY

Carl Goldberg Products, Ltd. has inspected and certified the components of this aircraft. The company urges the buyer to perform

his own inspection, prior to assembly, and to immediately request a replacement of any parts he believes to be defective for their

intended use. The company warrants replacement of any such components, provided the buyer requests such replacement with-

in a period of 10 days from the date of purchase and provided the defective part is returned, if so requested by the company.

No other warranty, expressed or implied, is made by the company with respect to this kit. The buyer acknowledges and under-

stands that it is his responsibility to carefully assemble the finished flying model airplane and to fly it safely. The buyer hereby

assumes full responsibility for the risk and all liability for personal or property damage or injury arising out of the buyer's use of the

components of this kit.

CARL GOLDBERG PRODUCTS, LTD.

P.O. Box 818 Oakwood GA 30566 Phone #678-450-0085 Fax # 770-532-2163 www.carlgoldbergproducts.com

1 2 3 4 5 6 7 8 9

Résumé du contenu

Page 1 - Surge 400

Surge 400WARNINGA radio-controlled model is not a toy and is not intended for persons under 16 years old. Keepthis kit out of the reach of younger ch

Page 2 - This booklet assumes you have

2USING THIS INSTRUCTION MANUALBefore you begin assembling your Surge 400 ARF, takesome time to read through this entire instruction book. It isdesign

Page 3 - Caution:

3ITEMS NEEDED TO COMPLETE THIS AIRCRAFT* 1 5 CHANNEL RADIO WITH 6 MICRO SER-VOS. (WE USED 6 CHANNEL FUTABARADIO WITH S3108 SERVOS AND GREATPLANES ELEC

Page 4 - Servo Extensions

4Installing Ailerons & Flaps1. * Collect the following parts:(1) Wing(2) Ailerons ( Left & Right)(2) Flaps ( Left & Right)(10) Mini CA hin

Page 5 - Stabilizer

52. * Remove the covering on both the ailerons &the flaps, where the control horn slots arelocated.* Using CA glue, attach the control horns to th

Page 6 - Fin & Rudder Installation

6“X”“X”4. *Measure from the end of the wing to the tip ofthe stab. This measurement should be thesame for both sides.* Mark the stabilizer where it re

Page 7 - Landing Gear

72. * Locate the slot in the rudder near the bottom.* Remove the covering over the slot.* Attach the EZ connector to the control hornwith the adjustin

Page 8 - Installing Motor & ESC

8Installing Motor & ESC1. * Collect the following parts:(1) Fuselage(1) Motor with Gear Drive (Not Included)(1) Electronic Speed Control (Not Incl

Page 9 - Balancing

92. * Mount the elevator and rudder servo asshown above.*Attach the pushrods to the servo arms thesame way you did the aileron servos.* Mount the two