Carl-goldberg GPMP1020 Mini Hold'em Electric Cradle Manuel d'utilisateur télécharger pdf

Cross Bar (x2)

Cradle Base (x2)

Small Cradle

Arm (x2)

Guide Stick (x4)

1/4" x 1/4" x 4-1/2"

[6 x 6 x 115mm]

Large Cradle

Arm (x2)

1. Remove all the parts from their laser-cut blank sheets.

For the best ﬁ nish, take your time to cut around each part

with a hobby knife where necessary.

2. With the exception of notches and slots where the parts

ﬁ t together, sand the edges of all the parts smooth.

3. Glue the guide sticks to the large cradle arms with the

bottom of each stick even with the bottom of each arm (be

certain you have selected the large arms, not the small

arms). And it doesn’t matter which side of the arms you

glue the sticks to—there isn’t a right or a left. Optional:

Sand the sticks even with the beveled edge of the arms.

4. Use pliers to ﬂ atten the spikes in both 6-32 blind nuts.

5. Mount a large arm and a small arm to each cradle base

with a 6-32 screw, washer and the blind nuts.

An airplane cradle is indispensable for holding the fuselage during assembly, maintenance, or simply while attaching the

wings when you get to the ﬂ ying ﬁ eld. With its adjustable arms and cradle bases, the Carl Goldberg Mini Hold’em suits

this purpose for most models up to “giant-scale.” The Mini Hold’em can be assembled as-is, or ﬁ nished with clear varnish

or paint. If applying a ﬁ nish, note that the parts ﬁ t is tight, so the notches in the cradle bases and cross bars will have to

be widened accordingly. This can be done with a strip of coarse sandpaper glued to a sheet of plywood, but use care not

to widen the notches too much. Otherwise, the parts will ﬁ t loosely and the stand may not be rigid.

™

1 2

Cross Bar (x2)Cradle Base (x2)Small Cradle Arm (x2)Guide Stick (x4)1/4" x 1/4" x 4-1/2"[6 x 6 x 115mm]Large Cradle Arm (x2) 1. Remove

Page 2

6. Optional: If you prefer the arms to remain level (without the ability to tilt), glue the remaining two guide sticks to the cradle bases at the bo

Pas de commentaire

Carl-goldberg GPMP1020 Mini Hold'em Electric Cradle Manuel d'utilisateur